The raceways of both the inner and outer rings of this bearing type are made with a set contact angle.The bearings are nonseparable.The balls are inserted utilizing a counter-bore construction which allows a larger number of balls to be installed than in the case
of deep-groove ball bearings.
Single-row angular contact ball bearings can sustain radial, axial or moment loads,however, any axial load must be applied in one direction.Due to their design, angular contact bearings will experience some amount of axial loading from any radial load that is applied.For this reason, they are often used in pairs. DHK probides the various combinations with preadjusted clearacne to simplify assembly.
Combination
DB
DF
DT
Support width
max
mid
-
Load capability
stiffness
max
mid
-
Sketch
Series
Bore diameter(mm)
Angle 30??
Angle 40??
7000(A)
-
10 - 240
7200(A)
7200B
10 - 240
7300(A)
7300B
10 - 240
Typical Applications:
Speed Reducers,Automotive Applications, Construction Equipment,Pumps,Printing Presses,Paper Mill Machines
Double-row Angular Contact
Ball Bearings
Typical Applications:
Magnetic Clutches, Crank Shaffs, Pulleys, and Escalators.
Series
Bore diameter (mm)
Angle20??
Angle30??
5200
10~110
10~110
5300
10~110
10~110
Contact Information
China DHK Group .
Add: Zhongguan Road 1238#, Zhenhai Economy Developing Zone B#, Ningbo, China
