Thrust ball bearings can handle loads in the axial direction only. Bearing ring mounted on the shaft are called shaft washers,and those mounted in the housing are called housing washers.Both washers contain raceways for the balls.
Thrust ball bearings are available as both single and bidirectional types.The bidirectional thrust bearing incorporates a third washer and an additional set of balls.This center washer is located in the axial direction by a shaft shoulder and sleeve.
Care must be taken in handling to prevent damage to the separable rings and ball assemblies.
Series
Bore (mm)
Plain
Align
Housing
Metric
51100
-
-
10~1250
51200
53200
53200U
10~1250
51300
53300
53300U
10~1250
51400
53400
53400U
25~1250
52200
54200
54200U
15~500
52300
54300
54300U
25~500
52400
54400
54400U
25~500
2900
-
-
10~500
Inch
9.525~ 1016.00
(3/8"~40")
Typical Applications:
Live Centers in Lathes,Lead Screws,Automotive Clutches,Kingpin Supports,and Speed Reducers
Contact Information
China DHK Group .
Add: Zhongguan Road 1238#, Zhenhai Economy Developing Zone B#, Ningbo, China
