| |
 |
Stamping |
|
|
| |
|
Machining |
|
|
| |
|
Casting |
|
|
| |
|
| Stamping |
Common material
Aluminum alloy
Copper/brass
Stainless steel
Cold or hot rolled steel
Hot-dip galvanized steel
Tin plate
Select other material according
to customer’s requirement also. |
Assembly method
Riveting
Welding
Thread connection
Press assembly |
Surface finish
Plating
Powder coated
Electrophoresis
Phosphate
Painting
|
Product category
Deep drawn
General Stamping
Assembly |
| Machining |
Pin & shaft Category
Gear category
Wheel category
|
Fastener category
Cutting category
Spring category
Mirror polishing |
Material
Aluminum, copper/brass, carbon steel,or stainless steel or according to customer’s requirement, Hardness HRC64~68 after heat treatment, Finish Ra 0.4(Rz 3.2/▽8 ) after grinding or mirror polishing.we can help customer to select material also or make product according to sample. |
| Casting |
Casting brief introduction
Customer can select different material according different process media, common material has
Cast iron,cast steel, stainless steel , Aluminum alloy and brass alloy etc.
Customer can select different process according different pressure, common process has sand cast, precision casting and forging etc.
Finish has sand blast, ball blast, polishing, zinc plated etc.
|
| Plastic Parts |
Common material
We select material according to customer’ drawing, confect material according to special requirement also, provide performance report per batch,we can make product according to customer’ sample.
Finish: powder coating,chromate plating,pring, vacuum film coating, spray-painting etc.
|
| Oil Seal |
Material
Common rubber:NBR、FKM/FPM、SILICONE、ACM、PU、PTFE etc , hardness range 60~90 shore A, customer can select any color.
Framework material:cold or hot rolled steel strip/plate, stainless steel etc
Spring material: steel wire, piano wire or stainless steel wire etc
Common model:
Framework included single-lip(B), Framework included double-lip(FB),no-spring(BV), Single lip outer frame(w)，Double lip outer frame(FW)，assembly single-lip(z), assembly double-lip(z). One-way return-type(SR/DL),pressure-resistant(NY) and so on.
We can design according to customer’ sample. Or help customer select suitable type.
|
|
|
